Spectra T950 - Page 268

Chapter 8 — Using the Cartridge Inventory Moving Cartridges Within a Partition
November 2016 User Guide—Spectra T950 Library
268
6. Ifyouaremovingacartridgetoaslot,locateandselectthedesiredslot
intheDestinationlist.
7. ClickAdd Move.Anentrylistingthemoveyoujustdefinedappearsin
theMoveQueuelist.
8. RepeatStep3onpage266throughStep7onthispageforeach
additionalcartridgeyouwanttomove.
Note: Ifyouwanttoremoveoneormoreofthemovesinthequeue:
 SelectthemoveandclickDeletetoremoveitfromtheMove
Queuelist.
 ClickDelete Alltoremoveallofthedefinedmovesfromthe
MoveQueuelist.
Cleaning  Cleaning—Listsalloftheemptyslotsintheselectedcleaningpartition.
 To TAP—Configuresamovethattransfersthemaintenancemagazine
containingthesourceslottotheTAPsothatyoucanremoveorreplacethe
cleaningcartridgefromthespecifiedslot.Themagazineisthenreturnedtoits
originallocation.
 All—Listallavailabledestinationsinthepartition,regardlessofthetype.
Note: SelectingaspecificdestinationtypeinsteadofusingAlldisplaysfewer
itemsthroughwhichyoumustscrolltolocatethedesireddestinationslot.
Partition Type Available Destinations
Figure 168 Add the move to the Move Queue.
Click Add Move to add the
defined move to the Move
Queue.