Spectra T950 - Page 269

Chapter 8 — Using the Cartridge Inventory Moving Cartridges Within a Partition
November 2016 User Guide—Spectra T950 Library
269
Process the Move Queue Usethefollowingstepstoprocessthemove
queuecreatedusingtheInventoryscreen.
1. Ifyouaremovingcartridgesintothelibrary,preparethecartridgesas
describedinPreparingCartridgesforUseonpage219.
Note: Whenimportingcartridges,youdonotneedtoputtheprepared
cartridgesintoamagazine.Youarepromptedtoinsertthe
preparedcartridgeintotheselectedemptyslotinthemagazine
thatisdeliveredtotheTAP .
2. Chooseoneofthemoveprocessingmodes:
Figure 169 Click Start Moves or Start in Background to begin processing the
move queue.
Click Start Moves
or Start in
Background.
Click... To...
Start Moves Beginprocessingthemove sintheorderthattheyarelistedinthequeue.A
progressscreentrackstheprogressofthemoveoperations.Whenallofthe
movesinthequeuehavebeenprocessed,thescreendisplaysthestatusofeach
move.Nootheroperationscanbestarteduntilthe
movescomplete.
Note: IftheTAPisthesourceforordestinationforamove,aFeedback
Requiredscreendisplays.
 From TAP—ThemagazinecontainingthedestinationslotismovedtotheTAP
sothatyoucaninsertacartridgeintheslotindicatedbytheFeedback
Requiredscreen.Themagazineisthenreturnedtoitsoriginallocation.
 To TAP—ThemagazinecontainingthesourceslotismovedtotheTAPsothat
youcanremoveorreplacethecartridgefromtheslotindicatedbythe
FeedbackRequiredscreen.Themagazineisthenreturnedtoitsoriginal
location.