Spectra T950 - Page 367

Chapter 12 — Library Troubleshooting Capturing Traces
November 2016 User Guide—Spectra T950 Library
367
7. ClickGonexttoeitherLCMTraceorComponentTrace.Thelibrary
retrievestherequestedtrace,whichmaytakeseveralminutes.
8. IfyouchosetosavethefiletoaUSBdeviceormailit,amessage
displaysshowingthefilenameforthetracefile.
Save to USB SavesthereporttotheUSBdevice.Theresultscanthenbeviewedfromany
devicethatcanreadfromUSB.
Note: ThisoptionisonlyavailableifyouinsertedaUSBdeviceinStep3on
page365.
Display Full LCM
Trace
Opensanewscreenthatshowstheentiretrace.
Note: TheDisplay Full LCM Tracecheckboxonlyappliestoselectionsmadein
theLCM Tracelist,notselectionsmadeintheComponent Tracelist.IfDisplay Full
LCM Traceisselectedwhenyouaregeneratingacomponenttrace,theselection
isignored.
Option Description
If you... The trace results...
Didnotselect
Display Full LCM
Trace,
DisplayinthescrollingboxontheSystemTracesscreen(seeFigure227on
page366).
SelectedDisplay
Full LCM Trace,
DisplayintheTraceResultsscreen.ClickPrevioustoreturntotheSystem
Tracesscreen.
Figure 228 Select the Display Full LCM Trace option to view
the entire LCM trace on the Full Trace screen (Error Log trace
results shown).