Spectra T950 - Page 377

Chapter 12 — Library Troubleshooting Discovering and Setting the BlueScale Vision Camera IP Address
November 2016 User Guide—Spectra T950 Library
377
9. ClicktheforwardarrowtodisplaytheNewSettingsconfirmation
screen.Confirmthatallofthesettingsarecorrect.
10. Clicktheforwardarrowtosavetheupdatedsettings.Aconfirmation
dialogboxdisplays.ClickOKtoconfirmthatyouwanttosavethenew
settings.
11. Aftersavingthenewcameraconfigurationverifythesettingsby
attemptingtoaccessthecameraatthenewIPaddress(seeUsingaWeb
Browseronpage175).
12. Ifthelibraryhasmultiplecameras,repeatthestepsinthissectionfor
eachcamera.MakearecordoftheIPaddressforeachcameraandthe
frameinwhicheachcameraislocated.
13. Othercamerasettingscanbeconfiguredifdesired.SeetheBlueScale
VisionCameraUserGuideforinformationaboutotheravailablesettings.
Figure 239 Confirm that the new settings for the camera are correct.
Figure 240 Save the updated settings for the camera.
Click arrow
to continue