Spectra T950 - Page 380

Chapter 12 — Library Troubleshooting Discovering and Setting the BlueScale Vision Camera IP Address
November 2016 User Guide—Spectra T950 Library
380
7. SelectSystem > General settings.OntheSystemGeneralSettings
screen,enterthefollowinginformation:
 Ifdesired,changetheHost name forthecamerasothatyoucan
easilyidentifyit.Thisnamedisplaysatthetopofthescreen.
 SelecttoKeep current date and time,Synchronize with computer time,
setthetimemanually,orsetthetimeautomaticallybyenteringthe
IPaddressordomainnameforanNTPserver.
8. ClickSave.
9. SelectNetwork > General settings.TheNetworkGeneralSettings
screendisplays.
Figure 244 Enter a Host name and set the date if necessary.
Figure 245 If you select Use fixed IP address, configure the
IP address for the camera.