Spectra T950 - Page 387

Chapter 12 — Library Troubleshooting Restoring the Library Configuration
November 2016 User Guide—Spectra T950 Library
387
7. ScrollthroughthelistofadvancedutilitiesandselectRestore Library
Configuration from Auto Save.Thescreenrefreshestoshowthedetails
fortheutility.
8. UsetheSelect a configuration time stampdrop‐downlisttoselectthe
configurationbackupfileyouwanttouse.Theautomaticallygenerated
configurationbackupfilesarenamed<date-time>cfg.zip,where
<date-time>isthetimestampforwhenthefilewascreated.
UnlessyoureplacetheLCMoritsmemorycard,thefirstfilelistedis
thezippedconfigurationbackupfilestoredontheLCMmemorycard.
Note: Ifav ailable,thezippedconfigurationbackupfilestoredontheLCM
memorycardusuallycontainsthemost recentlysav edlibrary
configurationinformation,aswellastheMLMandDLMdatabases. 
Checkthetimestampinthefilenametodeterminewhetherany
manuallygeneratedbackupfileyouhav eismorerecent.
9. ClickRun Utility.
Afterabriefdelay,theUtilityResultsscreenappears,showingthatthe
configurationwasrestored.Thelibrarythenperformsapower‐cycle
reset.
Figure 251 The Restore Library Configuration from Auto
Save utility.
Important
Before the library is restored using the configuration backup file on a USB device,
the library’s current configuration is saved to the USB device with a time stamp
indicating when the file was created. The library is then restored using the selected
configuration backup file on the USB device.
The USB device now contains one additional Auto Configuration Save file.