Spectra T950 - Page 388

Chapter 12 — Library Troubleshooting Restoring the Library Configuration
November 2016 User Guide—Spectra T950 Library
388
10. Oncethelibrarybeginsitspower‐onsequence,removetheUSBdevice
ifnecessary.
Restore Other Configuration Changes
Thelibrarydoesnotimmediatelygenerateaconfigurationbackupfile
whenyoumakechangestoanyofthelibraryconfigurationsettingsother
thanthoseforpartitions.Ifyoumadeanychangestothelibrary
configurationaftertheautomaticallygeneratedconfiguratio nbackupfile
youusedtorestorethelibrarywasgenerated,youneedtorepeatthose
changesaftercompletingtherestore.
 Ifyouhaveamanualbackupofthelibraryconfigurationthatismore
currentthantheautomaticallygeneratedconfigurationbackupfileyou
used,youcanuseittorestoretheupdatedconfiguration(seeRestore
theLibraryConfigurationUsingaSavedConfigurationonpage390).
 Ifyoudonothaveamanualbackupavailable,youneedtorestorethe
followingchangesmanually:
 Ifyoumadeconfigurationchangesafterthecreationdateofthe
automaticallygeneratedconfigurationbackupfileyouused,you
needtousetheoptionsintheSystemSetupscreentorepeatthose
changesaftertherestoreiscomplete.
 Ifyouenteredactivationkeysafterthecreationdateofthe
automaticallygeneratedconfigurationbac k up fileyouused,you
needtousetheOptionEnablementpaneoftheSystem
Configurationscreentore‐enterthosekeys(see EnterActivation
Keysonpage108).
Update the Library Inventory
Whenyourestoretheconfiguration,anymagazinesthatwereimported
intoapartitionaftertheconfigurationbackupfileyouusedwasgenerated
arenotrecognizedasbelongingtothepartition.Instead,thelibrary
notifiesyouthatthereareunusedmagazinesinthefreepool.
Usethefollowinginstructionstoupdatethelibraryinventorytoreflectthe
correctnumberofmagazinesassignedtothepartition.
1. Loginasauserwithsuperuseroradministratorprivileges.
2. Fromthetoolbarmenu,selectConfiguration > Partitions.TheShared
LibraryServicesscreendisplays.
3. ClickEditforthepartitiontowhichtheunassignedmagazinesshould
belong.
Important
If you do not remove the USB device, the library power-on sequence fails. 
If the library fails to boot, power off the library as described in Power Off the Library
on page 160. Once the library is powered off, remove the USB device and power on
the library as described in Power On the Library on page 158.