ST STM32G474

RM0440 Rev 4 1021/2126
RM0440 High-resolution timer (HRTIM)
1083
Bit 15 In HRTIM_CPT2BCR, HRTIM_CPT2CCR, HRTIM_CPT2DCR, HRTIM_CPT2ECR,
HRTIM_CPT2FCR:
TACMP2: Timer A compare 2
0: No action
1: Timer A compare 2 triggers capture 2
In HRTIM_CPT2ACR:
TFCMP2: Timer E compare 2
Refer to TACMP2 description.
Bit 14 In HRTIM_CPT2BCR, HRTIM_CPT2CCR, HRTIM_CPT2DCR, HRTIM_CPT2ECR,
HRTIM_CPT2FCR:
TACMP1: Timer A compare 1
0: No action
1: Timer A compare 1 triggers capture 2
In HRTIM_CPT2ACR:
TFCMP1: Timer F compare 1
Refer to TACMP1 description.
Bit 13 In HRTIM_CPT2BCR, HRTIM_CPT2CCR, HRTIM_CPT2DCR, HRTIM_CPT2ECR,
HRTIM_CPT2FCR:
TA1RST: Timer B output 1 reset
0: No action
1: Capture 2 is triggered by TA1 output active to inactive transition
In HRTIM_CPT2ACR:
TF1RST: Timer F output 1 reset
Refer to TA1RST description.
Bit 12 In HRTIM_CPT2BCR, HRTIM_CPT2CCR, HRTIM_CPT2DCR, HRTIM_CPT2ECR,
HRTIM_CPT2FCR:
TA1SET: Timer B output 1 set
0: No action
1: Capture 2 is triggered by TA1 output inactive to active transition
In HRTIM_CPT2ACR:
TF1SET: Timer F output 1 set
Refer to TA1SET description.
Bit 11 EXEV10CPT: External event 10 capture
Refer to EXEV1CPT description
Bit 10 EXEV9CPT: External event 9 capture
Refer to EXEV1CPT description.
Bit 9 EXEV8CPT: External event 8 capture
Refer to EXEV1CPT description.
Bit 8 EXEV7CPT: External event 7 capture
Refer to EXEV1CPT description.
Bit 7 EXEV6CPT: External event 6 capture
Refer to EXEV1CPT description.