ST STM32G474 User Manual

Embedded Flash memory (FLASH) for category 4 devices RM0440
172/2126 RM0440 Rev 4
4.6 FLASH interrupts
Table 26. Flash interrupt request
Interrupt event Event flag
Event flag/interrupt
clearing method
Interrupt enable control
bit
End of operation EOP
(1)
1. EOP is set only if EOPIE is set.
Write EOP=1 EOPIE
Operation error OPERR
(2)
2. OPERR is set only if ERRIE is set.
Write OPERR=1 ERRIE
Read error RDERR Write RDERR=1 RDERRIE
ECC correction ECCC Write ECCC=1 ECCCIE

ST STM32G474 Specifications

General

Brand	ST
Model	STM32G474
Category	Microcontrollers
Language	English