VOTEM VM15 - Masimo Spo Monitoring (Option); Display of Masimo Spo; Masimo Spo2 Measuring Screen; General

VM15 User Manual Masimo SpO2 Monitoring (Option)
125
20. Masimo SpO
2
Monitoring (Option)
Display of Masimo SpO
2
Masimo SpO2 Measuring Screen.
Figure 20-1. Masimo SpO2 Display
General
The VM15 Masimo SET Operating Instructions provide the necessary information for proper
operation of all models of the VM15 Masimo SET pulse oximetry system.
There may be information provided in this manual that is not relevant for your system.
General knowledge of pulse oximetry and an understanding of the features and functions of
the VM15 Masimo SET Pulse Oximeter are a prerequisite for its proper use.
Do not operate the VM15 Masimo SET Pulse Oximeter without completely reading and
understanding the instructions in this manual.
NOTE
Possession or purchase of this device does not convey any express or
implied license to use the device with unauthorized sensors or cables
which would, alone or in combination with this device, fall within the
scope of one or more of the patents relating to this device
Masimo patents: www.masimo.com/patents.htm.
SAFETY INFORMATION, WARNINGS, CAUTIONS AND NOTES
The VM15 Signal Extraction Pulse Oximeter’s is designed to minimize the possibility of
hazards from errors in the software program by following sound engineering design
processes, Risk Analysis and Software Validation.
⚫ Explosion hazard. Do not use the Pulse Oximeter in the presence of flammable
anesthetics or other flammable substance in combination with air, oxygen-
enriched environments, or nitrous oxide.
⚫ The Pulse Oximeter is NOT intended for use as an apnea monitor.
⚫ A Pulse Oximeter should be considered an early warning device.