VM15 User Manual Masimo SpO2
Monitoring (Option)
127
⚫ Do not place the pulse oximeter on electrical equipment that may affect the pulse
oximeter, preventing it from working properly.
⚫ Do not expose the pulse oximeter to excessive moisture such as direct exposure to
rain.
Excessive moisture can cause the pulse oximeter to perform inaccurately or fail.
⚫ Do not place containers containing liquids on or near the pulse oximeter.
Liquids spilled on the pulse oximeter may cause it to perform inaccurately or fail.
SPEED Function
To control the speed of SpO2 wave.
Four steps : 6.25, 12.5, 25, 50mm/sec
GAIN Function
To control the size of SpO2 wave.
Six steps : x0.25, x0.5, x1, x2, x3, x4
SETTING Function
To adjust SENSITIVITY, AVERAGING, FASTSAT, SMART TONE, SIQ
SpO2 ALARM Function
3 kind of Alarm Steps : High, Medium, Low Type
⚫ Alarm set : Off, 30~100, Off
⚫ Type alarm set : High, Medium, Low
PR ALARM Function
3 kind of Alarm Steps : High, Medium, Low Type
⚫ Alarm set : Off, 25~240, Off
⚫ Type alarm set : High, Medium, Low
Product description
The VM15 Pulse Oximeter is a noninvasive, arterial oxygen saturation and pulse rate monitor.
The VM15 can be used as either a Handheld or a Standalone monitor.
The VM15 features a backlit Liquid Crystal Display (LCD) that continuously displays numeric
values for SpO2, pulse rate, plethysmographic waveform and Signal Identification and Quality
Indicator (Signal IQ™).
To Next Page
Loading...