VM15 User Manual NIBP Monitoring
145
CAUTION: Do not connect NIBP Cuff at the same place where SpO2 sensor is connected into
the patient.
CAUTION: Do put only ONE cuff to the patient. (Do not put two cuffs to the patient at the
same.) SpO2 measurement may be influenced or alarm may begin.
CAUTION: Do not apply to the normal patient. (It is only for abnormal cases.).
CAUTION: After VENOUS STAT Function, reset into Auto or Manual to measure blood
pressure.
CAUTION: When not measuring, cancel the AUTO MODE. The life time of the valve, pump,
cuff is shortened.
To Next Page
Loading...
