VM15 User Manual How to operate VM15
67
WARNING: Never spray disinfectant directly onto the product. It can be cause
of products failure or safety hazard
CAUTION: If the power is not on after pressing the power switch, please stop
the use and contact the technical service team or the regional distributors.
CAUTION: Recommendation "The display value may not be correct if the
patient monitor has been not used for more than 3 months or completely
discharge. Please recharge for the good performance. "
Note: When the VM15 is not in use, connect the VM15's power cord to AC power, and
the VM15 can be used as a fully charged battery whenever necessary.
Note: The operation time of battery is various according to the recharged times even if it
is fully charged.
To Next Page
Loading...
