This menu is for setting the product's OS update and MAC address, and is protected by a
password.
If you select the menu, a password input window appears, and you can enter it only if the
four-digit password matches.
The initial password is “0000”, and the product administrator can change the password.
To change the password
1. Select the "*" button in the password input window and enter the current password.
2. If the passwords match, a new password can be entered.
3. After entering the new password and selecting the "enter" button, the password input
window will close. (password change completed)
4. You can enter the Admin option menu using the changed password.
Note. When changing the password, if the current password is incorrect three times, the
password input window is closed.
Please check the current password correctly and try again.
To reset the password
1. If you have forgotten the changed password, press the "#" button on the password input
window 5 times in a row.
2. If you select "OK" in the password reset pop-up Information window, the password is
reset to "0000".
Note. You must reset the password by pressing the "#" button 5 times in a row.
If you press another button while pressing the "#" button, you must press 5 times again.
FACTORY OPTION
This is an option for developers.
To Next Page
Loading...
