1
WEILER E2850 REMIXING TRANSFER VEHICLE
3-50
Operating Instructions
3
Machine Cleanup
4. Lower elevator until cleanout door legs are firmly in
contact with frame (4).
5. Open both cleanout door draw latches (5).
6. Raise elevator until cylinder stops drop onto cylinder
rods.
7. Unlatch both elevator lift cylinder stops (6) and
lower stops onto cylinder tubes.
The cleanout door will open as the elevator is raised. If door does not release as the elevator begins to
raise, pry door open before raising elevator further. Cleanout door will drop quickly when pried loose.
Falling door can crush. Door can open unexpectedly when stuck closed.
Pry door free before raising elevator fully. Keep clear of raised door.