Weiler E2850 - Page 89

WEILER E2850 REMIXING TRANSFER VEHICLE
3-33
Operating Instructions
3
Paving
6. Position discharge conveyor marker chain (4) to help
maintain position of conveyor discharge chute over
paver hopper.
7. Turn fume extraction fans (5) on.
8. Select Work Low or Work High ground speed (6).
9. Increase engine speed (7) to full throttle.
10. Turn on storage hopper and discharge conveyors
(8). Adjust speed with Hopper & Conveyor Speed
Dial (9).
11. Turn elevator on (10). Adjust elevator speed with
Elevator Speed Dial (11).
NOTICE: If elevator is engaged in raised position,
storage hopper flashing damage may result.
4
5
6
7
9
11
10
8