1
WEILER E2850 REMIXING TRANSFER VEHICLE
3-42
Operating Instructions
3
Paving
15. To adjust the “Set Distance” parameter while Distance From Paver Control System is activated,
adjust Propel Lever or Propel Speed Dial.
•To increase “Set Distance”, move Propel Lever forward or adjust Propel Speed Dial CW.
•To decrease “Set Distance”, move Propel Lever rearward or adjust Propel Speed Dial CCW.
Adjustments to the “Set Distance” parameter can be viewed on the Gauges Screen.
16. To engage Distance From Paver Control System
while transfer vehicle is in motion, press and release
Distance From Paver Control Engage/Disengage
Button once the transfer vehicle and paver are
within desired range. The following message will
appear on the screen.
! DISTANCE CONTROL
NOW ENGAGED !
ESC
To Next Page
Loading...
