Xerox Phaser 6000 Service Manual

Phaser 6000/6010 and WC 6015 MFP Xerox Internal Use Only 3-59
Error Messages and Codes
SMB Error
A SMB error is detected.
Applicable Error
• 031-521: SMB Login Error
• 031-526: SMB Name Resolve Error
• 031-530: SMB Path Error
• 031-533: SMB File Make Error
• 031-534: SMB Folder Make Error
• 031-535: SMB Delete File Error
• 031-536: SMB Delete Folder Error
• 031-537: SMB Disk Full Error
• 031-556: SMB Write Error
• 031-557: SMB File Duplication Error
• 031-558: SMB Connect Error
Initial Actions
• Cycle printer power.
• If the problem persists, use the following procedure.
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ IP Board, PL7.1.9
■ MCU Board, PL7.2.2
■ “Map 2 - WorkCentre 6015 MFP” on
page 10-22
■ “WorkCentre 6015 MFP Image
Processor Board” on page 10-32
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Reseat the connectors on the IP and
MCU Boards then cycle system
power.
Does the error persist?
Go to step 2. Complete.
2 Replace the IP Board (page 8-114).
Does the error persist?
Replace the
MCU Board
(page 8-121).
Complete.

Xerox Phaser 6000 Specifications

General

Brand	Xerox
Model	Phaser 6000
Category	Printer
Language	English