Xerox Phaser 6000 Service Manual

Phaser 6000/6010 and WC 6015 MFP Xerox Internal Use Only 3-97
Error Messages and Codes
ENV Sensor Error
An error occurred while reading the Humidity Sensor.
Applicable Error
• 092-661: Env Sensor Error
Initial Actions
• Cycle printer power.
• If the problem persists, use the following procedure
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ MCU Board, PL7.2.2 ■ “Map 3 - Phaser 6000/6010” on
page 10-9
■ “Phaser 6000/6010 Fuser” on
page 10-17
■ “Map 3 - WorkCentre 6015 MFP” on
page 10-23
■ “WorkCentre 6015 MFP Fuser” on
page 10-31
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Replace the MCU Board
(page 8-121).
Does the error persist when the
power is turned off and on?
Contact your
designated
field support for
assistance.
Complete.

Xerox Phaser 6000 Specifications

General

Brand	Xerox
Model	Phaser 6000
Category	Printer
Language	English