Xerox Phaser 6000 Service Manual

2-24 Xerox Internal Use Only Phaser 6000/6010 and WC 6015 MFP
Theory of Operation
Transfer/Fusing/Exit
When the sheet passes the registration section it then passes through the toner
transfer position. There it is nipped between the transfer belt and the Transfer
Roller that are driven by the Main Drive Assembly. The toner image on the transfer
belt is transferred onto the sheet. As the sheet is forwarded to the exit section, the
toner image is fused onto the sheet surface by the heat roller that is driven by the
Main Drive Assembly.
At the exit section, the sheet is ejected by the Fuser’s exit roller. The exit roller is
driven by the Main Drive Assembly.
Transfer Belt
Transfer Roller
Exit Roller
Pressure Belt
Heat Roller
s6000-086

Xerox Phaser 6000 Specifications

General

Brand	Xerox
Model	Phaser 6000
Category	Printer
Language	English