Xerox Phaser 6000 Service Manual

3-70 Xerox Internal Use Only Phaser 6000/6010 and WC 6015 MFP
Error Messages and Codes
NVRAM Error
Applicable Error
• 041-340: NVRAM Error
Initial Actions
• Cycle printer power.
• If the problem persists, use the following procedure.
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ MCU Board, PL7.2.2 ■ “Map 3 - Phaser 6000/6010” on
page 10-9
■ “Phaser 6000/6010 System Wiring” on
page 10-10
■ “Map 3 - WorkCentre 6015 MFP” on
page 10-23
■ “WorkCentre 6015 MFP System Wiring”
on page 10-24
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Perform the Electrical Noise test
(page 4-66).
Does the error persist?
Go to step 2. Complete.
2 Replace the MCU Board
(page 8-121).
Does the error persist when the
power is turned on?
Contact your
designated
field support for
assistance.
Complete.

Xerox Phaser 6000 Specifications

General

Brand	Xerox
Model	Phaser 6000
Category	Printer
Language	English