Xerox Phaser 6000 Service Manual

3-98 Xerox Internal Use Only Phaser 6000/6010 and WC 6015 MFP
Error Messages and Codes
X CRU Near Life
A Low Toner Cartridge (C, M, Y, or K) state was detected.
Applicable Error
• 093-423: Y CRU Near Life
• 093-424: M CRU Near Life
• 093-425: C CRU Near Life
• 093-426: X CRU Near Life
Initial Actions
• Replace the indicated Toner Cartridge.
• Cycle printer power.
• If the problem persists, use the following procedure.
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ Harn assy dckr, PL4.1.2
■ MCU Board, PL7.2.2
■ “Map 3 - Phaser 6000/6010” on
page 10-9
■ “Phaser 6000/6010 Developer” on
page 10-16
■ “Map 3 - WorkCentre 6015 MFP” on
page 10-23
■ “WorkCentre 6015 MFP Developer” on
page 10-30
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Reseat the Toner Cartridge.
Does the error persist?
Go to step 2. Complete.
2 Check P/J13 on the MCU Board.
Is the connector secure?
Go to step 4. Reconnect
P/J13, then go
to step 3.
3 Does the error persist? Go to step 4. Complete.
4 Replace the MCU Board
(page 8-121).
Does the error persist?
Contact your
designated
field support for
assistance.
Complete.

Xerox Phaser 6000 Specifications

General

Brand	Xerox
Model	Phaser 6000
Category	Printer
Language	English