Xerox Phaser 6000 Service Manual

Phaser 6000/6010 and WC 6015 MFP Xerox Internal Use Only 4-39
Troubleshooting
WorkCentre 6015 MFP Print Engine Test Procedures
Entering Print Engine Diagnostics
1. Turn the printer Off.
2. Press and hold the Up and Down Arrow simultaneously and turn the printer
On.
3. Release the buttons when CE Mode Please wait appears on the display.
4. Press OK at Printer.
5. Press OK at ESS Diag.
DEVE Roundtime K -
DEVE Roundtime
YMC
-
XERO Roundtime -
M/C DispTime Y -
M/C DispTime M -
M/C DispTime C -
M/C DispTime K -
M/C Pixel Y -
M/C Pixel M -
M/C Pixel C -
LM/C Pixel K -
M/C ColorEmptyBW -
M/C Custom Start -
M/C Custom End -
Waste Toner Y -
Waste Toner M -
Waste Toner C -
Waste Toner K -
Toner PV Y Std.: 700/High:14000
Toner PV M Std.: 700/High:14000
Toner PV C Std.: 700/High:14000
Toner PV K Std.: 700/High:14000
Toner DispTi me Y -
Toner DispTi me M -
Toner DispTi me C -
Toner DispTi me K -
Toner TDCC Y -
Toner TDCC M -
Toner TDCC C -
Toner TDCC K -
Toner Pixel Y -
Toner Pixel M -
Toner Pixel C -
Toner Pixel K -
Print Selecting this menu item prints the parameter values and life counter
values stored in the IOT.
Tes t
Control Panel
(WorkCentre 6015 MFP)
Tes t D e s c r ipti o n

Xerox Phaser 6000 Specifications

General

Brand	Xerox
Model	Phaser 6000
Category	Printer
Language	English