Xerox Phaser 6000 Service Manual

Phaser 6000/6010 and WC 6015 MFP Xerox Internal Use Only 4-23
Troubleshooting
Exit Sensor
1. Enter Service Diagnostics (page 4-11).
2. Run the Exit Sensor test: Engine Diag > Sensor Test > Exit Sensor.
3. Operate the actuator to check sensor function.
4. Confirm the number shown on the display increases every time the actuator is
operated.
5. Press the Cancel button to stop the test.
Paper
s6000-143
Exit Sensor Actuator
Paper

Xerox Phaser 6000 Specifications

General

Brand	Xerox
Model	Phaser 6000
Category	Printer
Language	English