Xerox Phaser 6000 Service Manual

Phaser 6000/6010 and WC 6015 MFP Xerox Internal Use Only 5-37
Image Quality
Incorrect Magnification
Incorrect magnification when copying with the ADF feeding.
Initial Actions
• Check the paper transfer path.
• Ensure there is no debris on the transfer path.
Troubleshooting Reference Table
Applicable Parts Example Print
■ ADF Assembly, PL8.1.2
■ IIT Assembly, PL8.1.8
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Check the media being used and its
condition.
Is the media dry and
recommended?
Go to step 3. Replace with
dry, approved
media, then go
to step 2.
2 Does the image print correctly? Complete. Go to step 3.
3 Replace the ADF Assembly
(page 8-37).
Does the error persist?
Replace the IIT
Assembly
(page 8-35).
Complete.
Magnification Incorrect

Xerox Phaser 6000 Specifications

General

Brand	Xerox
Model	Phaser 6000
Category	Printer
Language	English