Xerox Phaser 6000 Service Manual

8-116 Xerox Internal Use Only Phaser 6000/6010 and WC 6015 MFP
Service Parts Disassembly
Phaser 6000/6010 IP Board
Replacement Note
Use the following procedure after installing a new IP Board in the Phaser
6000/6010.
a. Power the printer on.
b. Open Windows Explorer.
c. Copy usbutil.exe, and paste it in the same folder with the following .prn
files.
d. Drag the appropriate .prn file for the printer you have and drop it on the
usbutil.exe file. The data is sent over USB to the device.
e. Start the CE Diags Tool.
f. Click the CE Diag tab.
g. In the options menu, located on the upper left of the CE Diag tab, select
Installation Set.
h. Enter the printer’s serial number in the Printer Serial Number text field,
and then click the Restart printer to apply new settings button.
Model Print File
Phaser 6000B, 110V Engine Karin-A_XC(US).prn
Phaser 6000B, 220V Engine Karin-A_XC(EU).prn
Phaser 6010N, 110V Engine KSXN_US.prn
Phaser 6010N, 220V Engine KSXN_EU.prn
s6000-055
P/J112

Xerox Phaser 6000 Specifications

General

Brand	Xerox
Model	Phaser 6000
Category	Printer
Language	English