YASKAWA DX100 - 7.3.2 Universal Output

8 System Setup
DX100 8.3 Tool Data Setting
8-27
5. Select {CALIBRATION}.
– The TOOL CALIBRATION window is shown.
6. Select the robot.
(1) Select the robot to calibrate.
(When the robot has already been selected or there is only one of
robot, this operation should not be performed.)
(2) Select “**” in the TOOL CALIBRATION window and select the
robot in the shown selection dialog box.
(3) The robot is set.
长沙工控帮教育科技有限公司
工控帮助教小舒QQ:2823408167