6-54
IM DLM6054-01EN
How the DL6000/DLM6000 Operates When the Action Setting Is
Print or Save to File
The DL6000/DLM6000 operates according to the settings in the Print menu or FILE menu. To access
these menus and their settings, see chapter 12, “Printing Screen Captures,” and chapter 13, “Saving
and Loading Data.” When the File Menu’s auto naming feature is OFF, file names will be assigned
through numbering. When auto naming is not off, the files are saved using the specified method.
Trigger Mode
The trigger mode temporarily switches to Normal.
This trigger mode is independent from the trigger mode set according to the procedure described in
section 6.1.
Mail Transmission Operations
Enabling and Disabling Mail Transmission (Mode)
When Mode is ON, e-mails will be sent to the addresses specified in: UTILITY menu > Network >
E-mail Setup > Address (To Address/From Address).
E-mail Transmission Interval (Interval)
The DL6000/DLM6000 will send an e-mail at the first trigger occurrence after the interval specified
here elapses.
An e-mail will also be sent when the action-on-trigger stops (s
topping includes manual stops).
The range of e-mail transmission intervals that you can set is indicated below. If you select OFF, an
e-mail will be sent whenever a trigger occurs.
OFF to 1440 min (in 1 min steps)
An example of e-mail transmission with a set interval:
Interval
Action-on-trigger/determination start
Interval
Interval
Action-on-trigger/determination
stop (includes manual stops)
Trigger
occurrence
&
e-mail transmission
&
e-mail transmission
E-mail
transmission
Trigger
occurrence
Trigger
occurrence
6.14 Setting the Action-On-Trigger
To Next Page
Loading...
Need help?
General
