YOKOGAWA DL6000 Series

10-5
IM DLM6054-01EN
Analysis and Searching
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Index
App
CURSOR
Marker
Menu
Press the CURSOR key, the Type soft key, and then the Marker soft key to display the following
menu.
Turns cursor measurement on and off
Set the cursor type to Marker.
Set the marker type (Mark, Line).
Press to set measurement items.
Set which cursor to configure (the measurement, jump and cursor position) settings for.
Set the waveform to measure (CH1–CH4, M1–M4).
Press to specify where to make the cursors jump to (Zoom1, Zoom2).
Set the cursor position.
Setting Measurement Items (Item)
Press the Item soft key to display the following screen.
For each marker, specify the basic measurement
items whose values you want to display.
See page 10-1.
Set the items that you want to measure.
10.1 Using Cursors to Make Measurements