8-2 IM 701450-01E
Setting the Display Format of Logic Waveforms
SEARCH
PRESET
ZOOM
MODE
POSITION
ENHANCED
SIMPLE
LOGIC
CH
1
CH 2
CH 3
CH 4
CH 5
CH 6
CH 7
CH 8
V/DIV TIME/DIV
VERTICAL
TRIGGER
TRIG D
ACTION
DELAY
CLEAR TRACESNAPSHOT
HELP
HORIZONTAL
• To exit the menu during operation, press ESC located
above the soft keys.
• For a description of the operation using a USB keyboard or
a USB mouse, see section 4.3.
1. Press LOGIC. The LOGIC menu appears.
2. Press the Mode soft key to select ON. The Format menu appears.
3. Press the Format soft key to select Both or Only.
• If you select Both, normal waveforms and logic waveforms are displayed
simultaneously in divided windows (top and bottom).
• If you select Only, only the logic waveforms are displayed over the entire screen.
Note
For a description of the other menus displayed on the LOGIC menu, see section 5.10.
8.1 Setting the Display Format
To Next Page
Loading...
