YOKOGAWA DL7440

1-8 IM 701450-01E
Display Example When Displaying X-Y Waveforms
Main waveform
display frame
X-Y waveform
display frame
X-axis scale value
Y-axis scale
value
Waveform
assigned to
the X-axis
Waveform
assigned to
the Y-axis
Display Example of the Setup Data List
If you press MISC, then the Next soft key, then the Setup Information soft key, a list of setup data
is displayed as shown below. This screen can be printed as additional information (see section
11.2) when the waveforms displayed on the screen (screen image) are printed on the built-in
printer (optional).
List of Setup Data Displayed on Both the DL7440 and the DL7480
Setup data related to the vertical axis, trigger, and horizontal axis of CH1 to CH4 is displayed.
List of Setup Data Displayed Only on the DL7480
If you press the Setup Information soft key again when the figure above is displayed, the
setup data related to the vertical axis, trigger, and horizontal axis of CH5 to CH8 is
displayed. The setup data related to the horizontal axis is the same as the setup data
displayed on both models in the figure above.
1.3 Display