YOKOGAWA DL7440

10-17
IM 701450-01E
10
Analyzing and Searching Waveforms
Executing/Aborting the Search
13. Press the Exec soft key. The search is executed, and the word Exec change to
Abort. Each time a waveform that matches the search condition is detected, the
search is aborted, and the word Abort changes to Exec.
To abort the search, press the Abort soft key. The search is aborted, and the
word Abort changes to Exec.
When a waveform that matches the search condition is detected, the zoom box moves
to that position and the zoom waveform display frame (the zoom waveform display
frame selected in step 12 if the zoom waveform display mode is Z1&Z2 or
Main&Z1&Z2) shows the detected waveform zoomed.
14. To search the next waveform using the same search condition, repeat step 13.
The search can be repeated to the right edge of the screen or up to 1000
detections.
Redisplaying the Detected Waveforms
15. Press the Searched Pattern soft key.
16. Turn the jog shuttle to select the number (same as the detection count) of the
detected waveform to be displayed. The zoom box moves to the position of the
detected waveform of the selected number, and the zoom waveform display
frame (the zoom waveform display frame selected in step 12 if the zoom
waveform display mode is Z1&Z2 or Main&Z1&Z2) shows the detected
waveform zoomed.
The numbers get larger as the detected waveforms become newer (detected
waveforms to the right have larger numbers than those to the left).
Detected waveform
number
Zoom waveform display frame
Detected waveform that has been zoomed
Detected waveformZoom box
Changing the Zoom Rate and Zoom Position of the Detected Waveform
17. Change the zoom rate and zoom position of the waveform according to the
procedures given in section 8.4.
10.4 Searching Waveforms Using the Search and Zoom Function