YOKOGAWA DL7440 User Manual

12-48 IM 701450-01E
Selecting/Resetting the Copy Source Files at Once
8. Turn jog shuttle to select a file, directory, or medium.
9. Press the All set soft key. Asterisks (∗) are displayed to the left of every file in
the directory containing the selected file or directory to indicate that they will be
copied. At the same time, the All Set soft key changes to the All Reset soft key.
10. Press the All Reset soft key. Asterisks (∗) are removed from the left of every
file in the directory containing the selected file or directory to indicate that they
will not be copied. At the same time, the All Reset soft key changes to the All
Set soft key.
Selecting the Copy Destination
11. Press the Dest Dir soft key. The Copy menu and the copy destination File List
window appears.
Selecting the Copy Destination Storage Medium or Directory
12. The procedure is the same as steps 13 to 15 on page 12-22.
Executing the Copy Operation
13. Press the Copy Exec soft key. All the copy source files with asterisk marks are
copied.
Specifying the File to Be Displayed in the File List Window and Viewing File
Properties
14. The procedure is the same as steps 22 to 25 on page 12-23.
12.15 Copying Files

YOKOGAWA DL7440 Specifications

General

Brand	YOKOGAWA
Model	DL7440
Category	Test Equipment
Language	English