13-37
IM 701450-01E
13
Ethernet Communications (Optional)
Displaying the Log
Before using this function, check that the communication interface of the DL7400 is set
to Network (see page 13-21).
Click the Log icon on the Web server window. The Log window that can display the past
log of errors that occurred on the DL7400, GO/NO-GO determination, and action-on-
trigger appears. Up to the 30 newest incidents are logged. Logs older than the most
recent 30 are not displayed.
Web Server Window
Log Window
Displaying the Log
• Selecting the Log Type (Select Kind of Log)
From the list box, select the item for displaying the log.
Error (log of errors that occurred on the DL7400)
Go/Nogo (log of GO/NO-GO determination)
For the setup procedure for the GO/NO-GO determination, see sections 10.9 and 10.10.
Action Trigger (log of action-on-triggers)
For the setup procedure for the action-on-trigger, see section 6.16.
• Updating the Log (Update)
Click Update. The selected log is displayed. If the selected type of log is the same
as that of the log being displayed, the log is updated.
13.7 Using the Web Server Function
To Next Page
Loading...
Need help?
General
