16-10 IM 701450-01E
Explanation
Memory Test
Tests whether the internal ROM and the built-in backup lithium battery is operating
correctly. If “Pass” is displayed, it is operating correctly. If “Failed” is displayed, contact
your nearest YOKOGAWA dealer.
Floppy Disk (or Zip)* Drive Test
Tests whether the floppy disk (or Zip) drive is operating properly. If “Failed” is displayed
after the test, contact your nearest YOKOGAWA dealer.
* Included on certain models only.
SCSI test*
Tests whether SCSI is operating properly. If “Failed” is displayed after the test, contact
your nearest YOKOGAWA dealer.
* Selectable on models with the SCSI option.
Printer Test
Tests whether the built-in printer is operating properly. If the tint is printed correctly, the
operation is normal. If printing is not correct, contact your nearest YOKOGAWA dealer.
Accuracy Test
Tests the accuracy of the A/D converter. If “Failed” is displayed, contact your nearest
YOKOGAWA dealer.
PC Card Test
Tests whether the PC card is operating properly. If “Failed” is displayed after the test,
contact your nearest YOKOGAWA dealer.
Key Test
Tests whether the front panel keys are operating properly. If the name of the key being
pressed appears highlighted, the key is operating correctly. If it does not, contact your
nearest YOKOGAWA dealer.
Soft Key Test
Tests whether the soft keys are operating properly. If the characters on the keyboard
used to enter values and strings are entered correctly, the soft keys are operating
correctly. If not, contact your nearest YOKOGAWA dealer.
16.3 Performing a Self-Test
To Next Page
Loading...
Need help?
General
