Abbott CELL-DYN 3000 - Page 207

28 Oct
1997 21:57
CELL-DYN
®
3/35 Sample Loader TS Guide 9140234B-June 1997
VERIFICATION PROCEDURES
VP - 6.1 Mixing Head Position Check
3 - 82
3
Search
Book TOC
Go Back
e. Press (
X →
) key to move Rack into cutout. Mixin
g
Head Tool should be under Mixin
g
Paddle
(Fi
g
ure 3-38).
f. Observe tool while movin
g
mixin
g
paddles (Z
↓
) all the way down.
Figure 3-39 Mixing Head and Alignment Tool
g
. If E Loader, check both paddles.
No Pla
y
Between
Tool and Mix Paddle
Mixer Tip Fits
Completel
y
into Tool
E & F Loaders
SL-196A