6241A/6242 DC Voltage Current Source/Monitor Operation Manual
4.2.6 MENU Key (Parameter Setting)
4-14
Header Sets the header ON or OFF.
On: Header ON
Off: Header OFF
Talk Only Switches between Addressable and Talk only function.
This item does not appear when the USB interface is selected.
On: Talk only
Off: Addressable
SYSTEM Sets the 6241A/6242 system parameters.
Limit Buz Buzzes when the limiter (compliance) activates.
On: Turns ON the limit detection buzzer.
Off: Turns OFF the limit detection buzzer.
CompareBuz Buzzes depending on the measurement data Comparator calcula-
tion result.
Off: Turns OFF the Comparator calculation buzzer.
HI: Buzzes when the Comparator calculation results are in
HI.
GO: Buzzes when the Comparator calculation results are in
GO.
LO: Buzzes when the Comparator calculation results are in
LO.
HI or LO:
Buzzes when the Comparator calculation results are in
HI or LO.
Notice Buz Buzzes when operations such as Memory Full, saving or loading
parameters are complete.
On: Turns ON the notice buzzer.
Off: Turns OFF the notice buzzer.
Self Test Executes a self-test for selected test items.
Error Log Can read the data stored in the error log when ERR indicator turns
ON.
Displays the number of errors that occurred, and the error contents
can be read using an error number and message.
When this parameter is displayed, the content of the error log is
cleared and ERR indicator also turns off.
To Next Page
Loading...
General