ADCMT 6241A User Manual

6241A/6242 DC Voltage Current Source/Monitor Operation Manual
3.2 Battery Charge and Discharge Test
3-6
Discharge test
1. Set at Current-source Voltage-measurement.
2. Set the discharge test conditions parameters.
3. Turn Operate ON.
Battery charging starts by using the pulse current and discharging is completed
when the battery voltage is +1.0 V or less and the battery automatically enters the
stand-by mode.

ADCMT 6241A Specifications

General

Brand	ADCMT
Model	6241A
Category	Monitor
Language	English