Agilent Technologies 35670A User Manual

To recall a capture buffer from a flexible disk
1 If the saved time-capture buffer was saved on a single disk, insert that disk in the
analyzer’s internal disk drive.
or
If the saved buffer was split and saved on several disks, insert the disk containing the
first part of the buffer.
2 If you have not already designated the internal disk as the default disk, press
[
Save/Recall
][
DEFAULT DISK
][
INTERNAL DISK
].
3 Press [
Save/Recall
][
RECALL DATA
][
RECALL CAPTURE
], type the name of the file
containing the saved buffer, then press [
ENTER
].
4 If you are recalling a split buffer, insert another disk and press [
CONTINUE RECALL
]
when the analyzer instructs you to do so.
If the recalled time-capture buffer is too big to fit in the available memory, the recall
operation is aborted. You can sometimes make more memory available for the capture
buffer by removing other items from memory. You do this with softkeys grouped
under [
System Utility
][
MEMORY USAGE
].
Agilent 35670A
Operator's Guide Using Time Capture
7-7

Agilent Technologies 35670A Specifications

General

Brand	Agilent Technologies
Model	35670A
Category	Measuring Instruments
Language	English