Agilent Technologies 35670A User Manual

To create a synthesis table
1 Press [
Analys
][
SYNTHESIS
].
2 Select the table format. See the previous tasks.
3 Press [
EDIT TABLE
].
In the first column, enter <number><unit>.
If the entry is a complex conjugate pair,
press [
+j
] to designate the imaginary part of the complex pair.
4 Use the knob to move the highlighted bar to the left column.
Enter <number><unit>.
If the entry is a complex conjugate pair,
press [
+j
] to designate the imaginary part of the complex pair.
5 To enter additional table entries, use the knob to move the highlighted bar and repeat
steps 2 and 3.
6 If you make a mistake, move the highlighted bar over the entry you want to change.
Press [
CHANGE VALUE
] <number><unit>.
7 Press [
Rtn
].
The maximum number of table entries is dependent upon the table format. See
“Entering Data” in the previous section.
Agilent 35670A
Synthesis Option 1D3 Operator's Guide
15-22

Agilent Technologies 35670A Specifications

General

Brand	Agilent Technologies
Model	35670A
Category	Measuring Instruments
Language	English