Agilent Technologies 35670A

To transfer a curve fit table to a synthesis table
1 Press [Analysis][
SYNTHESIS
].
2 Press [
TABLE ON OFF
] to highlight ON.
3 Press [
COPY FROM CURVE FIT
].
The curve fit table transfers as a pole-zero format synthesis table. The analyzer’s
curve fitter does not work with a non-Hermitian frequency-response trace because it is
not possible for our pole-zero format to have non-Hermitian table entries.
Any values already in the synthesis table are erased when the curve-fit table is copied.
Agilent 35670A
Synthesis Option 1D3 Operator's Guide
15-34