Agilent Technologies 35670A User Manual

To change the curve fit register
1 Press [
Analys
][
CURVE FIT
][
CURVE FIT REGISTER
].
2 Press [
D1
]
or
Press [
D2
]
or
Press [
D3
]
or
Press [
D4
]
or
Press [
D5
]
or
Press [
D6
]
or
Press [
D7
].
Theresultsofthecurvefittracearestoredinadedicateddataregister. Thedefault
register is D6.
If you change the curve fit register, your selection is stored in RAM. If you preset the
analyzer, the selection returns to the default data register, D6.
Caution The data registers are cleared when you turn off the analyzer. Save the contents of a
data register to a file before power-down or it will be lost.
Agilent 35607A
Operator's Guide Curve Fit Option 1D3
16-43

Agilent Technologies 35670A Specifications

General

Brand	Agilent Technologies
Model	35670A
Category	Measuring Instruments
Language	English