Agilent Technologies 35670A

To specify an operand within an operation
1 Select the function register.
Press [
Analys
][
DEFINE FUNCTION (F1-F5)
].
Press [
DEFINE F1
].
or
Press [
DEFINE F2
].
or
Press [
DEFINE F3
].
or
Press [
DEFINE F4
].
or
Press [
DEFINE F5
].
2 Specify the operation.
Press [
OPERATION
] and then press the appropriate operation softkey.
3 Specify the data.
Press [
MEAS DATA
] and then press the appropriate measurement softkey.
or
Press [
DATA REGISTER (D1-D8)
] and then press the appropriate [
DATA REGISTER
]
softkey.
or
Press [
CONSTANT (K1-K5)
] and then press the appropriate [
CONSTANT
] softkey.
or
Press [
FUNCTION (F1-F5)
] and then press the appropriate [
FUNCTION
] softkey.
An operand can contain:
• the current input data
• a stored trace (the contents of a data register)
• the contents of a function register
• a constant (the contents of a constant register)
Agilent 35670A
Operator's Guide Math Operations and Data Editing
18-5