Agilent Technologies 35670A

To create a DOS directory
1 Press [
Disk Utility
][
DEFAULT DISK
][
CREATE DIRECTORY
].
or
Pre ss [
Save/Recall
][
DEFAULT DISK
][
CREATE DIRECTORY
].
2 If you want to create a subdirectory in the current directory, type the new
subdirectory’s name and press [
ENTER
].
3 If you want to create a subdirectory in some other directory, type the path to that other
directory followed by the new subdirectory’s name and press [
ENTER
].
You can create new directories only on DOS-formatted disks. You cannot create them
on LIF-formatted disks, because the LIF format does not support a hierarchical
directory structure.
See the previous task for more information on paths.
Agilent 35670A
Managing Files and Disks Operator's Guide
13-6