Part IV Using Advanced Tools
15 Synthesis Option 1D3
Synthesis 15-2
The Synthesis Table and Data Formats 15-4
To display a synthesis table — Pole-Zero Format 15-15
To select/convert a table format — Pole-Residue format 15-16
To select/convert a table format — Polynomial format 15-17
Creating a Synthesis Table 15-18
To create a synthesis table 15-22
To clear a synthesis table 15-24
Performing the Synthesis 15-25
To synthesize a frequency response curve 15-26
To change the data spacing for the X-axis 15-28
Working With Synthesis Tables 15-29
To edit an existing synthesis table 15-30
To save a synthesis table 15-31
To save a synthesis trace 15-32
To recall a synthesis table 15-33
To transfer a curve fit table to a synthesis table 15-34
To change the synthesis register 15-35
16 Curve Fit
Option 1D3
Curve Fit 16-2
Overview of Curve Fit Procedures 16-27
To set up a curve fit 16-30
To specify a weighting function 16-32
To perform a curve fit 16-33
To set up a curve fit — manual operation 16-34
Working with Curve Fit Tables 16-36
To edit a curve fit table 16-37
To transfer a curve fit table to a synthesis table 16-38
To
compare a frequency response measurement to synthesized results 16-39
To save a curve fit table 16-40
To save a curve fit’s frequency response function 16-41
To recall a curve fit table 16-42
To change the curve fit register 16-43
To Next Page
Loading...
