317
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_call_ms_reported_cap_sch_rev.fm
CALL:MS:REPorted:CAPability:SCHannel:REVerse
CALL:MS:REPorted:CAPability:SCHannel:REVerse[:SUPPort]?
CALL:MS:REPorted:CAPability:SCHannel:REVerse:CONVolution[:SUPPort]?
CALL:MS:REPorted:CAPability:SCHannel:REVerse:CONVolution:DRATe1[:MAXimum]?
CALL:MS:REPorted:CAPability:SCHannel:REVerse:CONVolution:DRATe2[:MAXimum]?
Function This query only command returns the mobile station’s capability to support the reverse
supplemental channel, as reported by the mobile station.
Query Range: YES|NO|UNKN
*RST Setting UNKN
Programming Example
OUTPUT 714;”CALL:MS:REPORTED:CAPABILITY:SCHANNEL:REVERSE:SUPPORT?”
Function This query only command returns the mobile station’s capability to support convolutional coding
on the reverse supplemental channel, as reported by the mobile station.
Query Range: YES|NO|UNKN
*RST Setting UNKN
Programming Example
OUTPUT 714;”CALL:MS:REPORTED:CAPABILITY:SCHANNEL:REVERSE:CONVOLUTION:SUPPORT?”
Function This query only command returns the mobile station’s maximum convolutional coder data rate on
the reverse supplemental channel for rate set 1, as reported by the mobile station.
Query Range: BPS9600|BPS19200|BPS76800|BPS153600|BPS307200|UNKN
*RST Setting UNKN
Programming Example
OUTPUT 714;”CALL:MS:REPORTED:CAPABILITY:SCHANNEL:REVERSE:CONVOLUTION:DRATE1:MAXIMUM?”
Function This query only command returns the mobile station’s maximum convolutional coder data rate on
the reverse supplemental channel for rate set 2, as reported by the mobile station.
Query Range: BPS14400|BPS28800|BPS57600|BPS230400|UNKN
*RST Setting UNKN
Programming Example
OUTPUT 714;”CALL:MS:REPORTED:CAPABILITY:SCHANNEL:REVERSE:CONVOLUTION:DRATE2:MAXIMUM?”
To Next Page
Loading...
