318
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_call_ms_reported_cap_sch_rev.fm
CALL:MS:REPorted:CAPability:SCHannel:REVerse
CALL:MS:REPorted:CAPability:SCHannel:REVerse:COUNt?
CALL:MS:REPorted:CAPability:SCHannel:REVerse:RCONfig?
CALL:MS:REPorted:CAPability:SCHannel:REVerse:TURBo[:SUPPort]?
CALL:MS:REPorted:CAPability:SCHannel:REVerse:TURBo:DRATe1[:MAXimum]?
Function This query only command returns the mobile station’s capability to support multiple reverse
supplemental channels, as reported by the mobile station.
Query Range: 0|1|2, 9.91 E+37
*RST Setting 9.91 E+37
Programming Example
OUTPUT 714;”CALL:MS:REPORTED:CAPABILITY:SCHANNEL:REVERSE:COUNT?”
Function This query only command returns the mobile station’s capability to support reverse supplemental
channel radio configurations, as reported by the mobile station.
This query returns a comma-separated string of any combination of 3, 4, 5, or null.
Query Range: 3|4|5|null
*RST Setting null
Programming Example
OUTPUT 714;”CALL:MS:REPORTED:CAPABILITY:SCHANNEL:REVERSE:RCONFIG?”
Function This query only command returns the mobile station’s capability to support the reverse
supplemental channel turbo coder, as reported by the mobile station.
Query Range: YES|NO|UNKN
*RST Setting UNKN
Programming Example
OUTPUT 714;”CALL:MS:REPORTED:CAPABILITY:SCHANNEL:REVERSE:TURBO:SUPPORT?”
Function This query only command returns the mobile station’s maximum turbo coder data rate on the
reverse supplemental channel for rate set 1, as reported by the mobile station.
Query Range: BPS9600|BPS19200|BPS76800|BPS153600|BPS307200|UNKN
*RST Setting UNKN
Programming Example
OUTPUT 714;”CALL:MS:REPORTED:CAPABILITY:SCHANNEL:REVERSE:TURBO:DRATE1:MAXIMUM?”
To Next Page
Loading...
