To Next Page

To Previous Page

345

S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_call_paging.fm

CALL:PAGing

CALL:PAGing:IMSI:MCC

CALL:PAGing:IMSI:MNC

CALL:PAGing:IMSI:MSIN

Function Sets/queries the mobile country code.

This parameter will be overwritten when a new MSIN (Mobile Station Identification Number) is

reported by the mobile station during registration. If paging MCC is reported by the mobile

station and there are fewer digits than expected, the test set will assume leading zeroes.

Setting Range: 3 digit string

Query Range: 3 digit string

*RST Setting 310

Programming Example

OUTPUT 714;"CALL:PAGING:IMSI:MCC ’222’"

Function Sets/queries the mobile network code.

This parameter will be overwritten when a new MSIN (Mobile Station Identification Number) is

reported by the mobile station during registration. If paging MNC is reported by the mobile

station and there are fewer digits than expected, the test set will assume leading zeroes.

Setting Range: 2 digit string

Query Range: 2 digit string

*RST Setting 00

Programming Example

OUTPUT 714;"CALL:PAGING:IMSI:MNC ’10’"

Function Sets/queries the mobile country code.

This parameter will be overwritten when a new MSIN (Mobile Station Identification Number) is

reported by the mobile station during registration. If paging MSIN is reported by the mobile

station and there are fewer digits than expected, the test set will assume leading zeroes.

Setting Range: 10 digit string

Query Range: 10 digit string

*RST Setting 5099214001

Programming Example

OUTPUT 714;"CALL:PAGING:IMSI:MSIN ’5099213572’"

!sets the paging IMSI MSIN to 5099213572.

Agilent Technologies 8960 Series Reference Guide

Other manuals for Agilent Technologies 8960 Series