460
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_fetch_saudio.fm
FETCh:SAUDio
FETCh:SAUDio[:ALL]?
FETCh:SAUDio:DISTortion[:AVERage]?
FETCh:SAUDio:DISTortion:MAXimum?
Function This query returns the swept audio measurement results. This query returns results in the
following order: integrity indicator, average swept audio level and average distortion for the first
frequency point, average swept audio level and average distortion for the second frequency point,
and so on. The number of frequency points is determined with the
“SETup:SAUDio:FREQuency:POINts” command.
For frequencies above 10 kHz, this measurement returns 9.91 E+37.
Query Integrity indicator
• Range: See “Integrity Indicator” on page 222.
• Resolution: 1
Average audio level
• Range: 1 mV to 20 V, 9.91 E+37
• Resolution: the lesser of 4 significant digits or 10 uV
Average distortion
• Range: 0 to 99.9%, 9.91 E+37
• Resolution: 0.01%
Function This query returns a comma separated list of the audio distortion measured at each frequency
point in the sweep. The number of frequency points is determined with the
“SETup:SAUDio:FREQuency:POINts” command.
For frequencies above 10 kHz, this measurement returns 9.91 E+37.
Query Average audio distortion
• Range: 0 to 99.9%, 9.91 E+37
• Resolution: 0.01%
Function This query returns a comma separated list of the maximum audio distortion measured at each
frequency point in the sweep. The number of frequency points is determined with the
“SETup:SAUDio:FREQuency:POINts” command.
For frequencies above 10 kHz, this measurement returns 9.91 E+37.
Query Range: 0 to 99.9%, 9.91 E+37
Resolution: 0.01%
To Next Page
Loading...
Need help?
General
