488
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_read.fm
READ
READ:DAPower[:ALL]?
READ:FM[:ALL]?
Function Initiates and fetches a digital average power measurement as a sequential operation.
Measurement results are returned in the following order: integrity, digital average transmit
power.
If the multi-measurement state is on, the result represents the average of a number of digital
average power measurements. Multi-measurement state, by default, is off. To set up
multi-measurements, see “SETup:DAPower:COUNt[:SNUMber]” .
Query Integrity
• Range: 0 to 23 see “Integrity Indicator”
• Resolution: 1
Digital average power:
• Range: -100.00 to 100.00 dBm, 9.91 E+37
• Resolution: 0.01 dB
Function Initiates and fetches an FM measurement as a sequential operation.
Measurement results are returned in the following order: integrity, average frequency deviation,
average distortion.
The distortion measurement must be enabled before a measurement result (other than
9.91E+37) is reported. See “SETup:AFANalyzer:SDIStortion:STATe” on page 510.
Query Integrity
• Range: 0 to 23 see “Integrity Indicator”
• Resolution: 1
Average FM frequency deviation
• Range: 0.000 to 99.000 kHz, 9.91 E+37
• Resolution: 0.001 Hz
Average FM distortion
• Range :0.0 to 100.0%, 9.91 E+37
• Resolution: 0.1%
Average FM frequency
• Range: 0.0 to 99999.0 Hz, 9.91 E+37
• Resolution: 0.1 Hz
To Next Page
Loading...
Need help?
General
